• Anbaukehrmaschine
  • GSB 1500
  • GSB 1500

GSB-Model

The Uni-Truck system offers universal possibilities for users in industry and trade, for municipalities or service industries, in gardening and landscaping, in road construction and in agriculture. The Uni-Truck is available in two basic versions. Various additional equipment is available for each basic version.

Technical Details

GSB-1200 GSB-1500 GSB-2000
Working Width 1200 mm 1500 mm 2000 mm
Debris Container capacity 240 Liter 260 Liter 305 Liter
Roller sweeper diameter 600 mm 600 mm 600 mm
Total width 1410 mm 1710 mm 2210 mm
Length 1530 mm 1530 mm 1530 mm
Height 830 mm 830 mm 830 mm
Weight (base unit) 350kg 400kg 470kg
Side broom right/left optional optional optional
Water spraying unit optional optional optional
Hydraulic unit optional optional optional

Carrier Vehicle

Forklift*
Wheel loader*
Skid steer loader* (✓) (✓) (✓)
Telescopic loader* (✓) (✓) (✓)
Tractor * (✓) (✓) (✓)
Unimog *
Multicar *
Municipal vehicles*

(Alle Angaben sind annähernd und unverbindlich. Änderungen im Interesse der technischen Weiterentwicklung vorbehalten.)
Längen und Höhenangaben sind mit Gabelaufnahme gemessen
*abhängig von Hubleistung und Fahrzeugbreite

Available Snap-On Adapters to GRÜNIG Attachment Sweeper:

Snap-On Adapter for Forklifts and Wheel-Loaders with Pallet Forks
mounting adapter for attaching the GSX/GSO/GSW sweeping machines to the pallet forks of a forklift or wheel-loader.

Snap-On Adapter for Quick-Change Coupler of a Wheel-Loader
available for wheel-loaders of almost any make and model.

Snap-On Adapter for Compact-Loader
available for compact-loaders of almost any make and model.

Snap-On Adapter for Front-Triangle of Tractors
for mounting a GSX/GSO/GSW sweeping machine to the front-triangle of a tractor.

Snap-On Adapter for Front/Rear Three-Point Hitch of Tractors
for front or rear mounting of a GSX/GSO/GSW sweeping machine to the three-point hitch of a tractor

Snap-On Adapter for Front-Attachment to an Unimog
for the front mounting of a GSX/GSO/GSW sweeping machine to an Unimog on request

Hydraulic – Lifting – Unit for Unimog
lifting height appr. 50 cm, fits to Snap-On Adapter for an Unimog and lifts the Grünig sweeper up for the opening and emptying of the debris container on request

Lifting mast for high dump emptying
for GSX/GSO-1200, GSO/GSX-1200 400l and GSX 1500
emptying hight 1.60 m, necessary is another free hydraulic control circuit for the lifting mast

Lifting mast for high dump emptying for GSX/GSO-1500/500 or GSX/GSO-2000
more sturdy version of lifting mast, like lifting mast for GSX/GSO1200-1500

2 m lifting capacity of Lifting mast instead of 1.60 m

Pallet Forks for Lifting mast
necessary for lifting mast (the sweeping machine must be equipped with the Snap-On Adapter for Forklifts)

Supporting wheels for Lifting mast
in purpose of weight reduction of the sweeper in combination of the lifting mast

Optional Equipment to GRÜNIG Attachment Sweeper

Gutter Brush right or left side
for all GSX-models, broom diameter 600 mm, broom with 50%/50% steel/polypropylene, operation mode and rpm can be controlled independently of the main broom, with separate hydraulic drive unit

Collision Protection for Gutter Brush
massive steel frame to protect the gutter brush

Water Spraying Unit 100 Liter
for all GSX-GSW models, operated with 12 V electric pump, special spraying nozzles for fine water dispersion, includes 100 litre water tank

Water Spraying Unit 200 Liter
Water Pump with 24 Volt (instead of 12 Volt)

Skraper for the removal of encrusted mud and loam for all GSX/GSO/GSW-Models,
with tough steel segments, to be used on asphalt and construction grounds, removable

Broom made of 100 % steel wire
for all GSX/GSO/GSW-Models, instead of the standard broom made of 50/50% Steel-/Polypropylene

Hydraulic Gasoline Power Unit
optional drive unit for all GSX-GSW models , robust one cylinder, 8,5 KW (11 HP) Briggs & Stratton gasoline engine with electric starter, mounted on the top of the sweeping machine, with motor hood, including the hydraulic pump and oil tank

Hydraulic Diesel Power Unit
optional drive unit for all GSX-GSW models, robust one cylinder, 8,0 KW (10 HP) Kubota diesel engine with electric starter, mounted on the top of the sweeping machine, noise-encapsulated, with motor hood, including the hydraulic pump and oil tank

Remote Control for Hydraulic Diesel Power Unit and Water Spraying Unit

Hydraulic Electric Power Unit
optional drive unit for all GSX models, 8 KW electric motor, available for 24/48 or 8o V electric forklifts, with connecting cables for forklift, mounted on top of the sweeping machine, including the hydraulic pump and oil tank

Hydraulically actuated Debris Release Lever for GSB/GSX/GSO-Models without Hydraulic Power Unit

Hydraulically actuated Debris Release Lever for GSB/GSX/GSO -Models with Hydraulic Power Unit

Hydraulic Angular Adjustment (GSO/GSW-Models) including hydraulic adapters

High efficiency Oil-Divider
“gear-type” oil divider, necessary if the carrier vehicle generates an oil-flow of 110 litre/min or more, the oil-divider allows the return of the excessive oil flow to the oil tank of the carrier vehicle without generating excessive heat, includes the equipment of the sweeper with oil-pipes with bigger diameter

Special Heavy Duty Wheels
for theGSX/GSO/GSW-1200,GSX-1500,GSX-2000 and 2300 Model instead of the standard wheels, special rim with increased load capability, steel-reinforced tire made of a special low-wear plastic material

Special Varnishing
there is a choice of numerous colors (standard color: bright red)

  • Sweeping
  • Dirt-collecting sweeper GSB-1200
    Working width 1.20 m, with integrated dirt hopper, dirt hopper capacity approx. 240 litres, maintenance-free hydraulic drive, adjustable sweeping roller, sweeping roller diameter 600 mm, sweeping roller set 50/50% polypropylene/steel corrugated wire, three 360° rotating support wheels, incl. hydraulic quick couplings Indunorm CEL ST 3, without mounting for carrier vehicle.
  • Dirt-collecting sweeper GSB-2000
    Working width 2.00 m, with integrated dirt container, dirt container capacity approx. 305 litres, other design and equipment as model GSB-1200, without mounting for carrier vehicle.
  • Full encapsulation of the sweeper
    for almost dust-free operation of the sweeper, including dust protection rubber all around and quick-release bars for easy replacement of the dust protection rubber.
  • Forklift trucks and wheel loaders with pallet forks
    Attachment for hooking a GSB/GSX/GSO/GSW/GSV sweeper into the lifting forks of a forklift or wheel loader, maximum fork cross-section dimensions 185 x 68 mm, with floating position, incl. fork clamp screw connection and safety clip
  • Quick-change device
    Wheel loader and skid steer loader mounting plate for direct attachment of a GSB/GSX/GSO/GSW/GSV sweeper to the quick coupler of a wheel loader, with floating position
  • Increased pendulum travel for floating position
    Increased vertical pendulum travel in the floating position of the fork mount of a GSB/GSX/GSV sweeper
  • Front loader
    Device for mounting a GSB/GSX/GSO/GSW/GSV sweeper on the front loader of a tractor, with floating position, (the mounting device for pallet forks is also required)
  • Front triangle attachment for small tractors
    Front triangle for mounting a GSB/GSX/GSO/GSW/GSV sweeper or a lift mast to the front hydraulics of a municipal tractor
  • Three-point linkage tractors
    for mounting a GSB/GSX/GSO/GSW/GSV sweeper or a lift mast to the front/rear three-point linkage of a tractor
  • Implement plate Unimog
    suitable for Unimog vehicle plate for front attachment of a GSB/GSX/GSO/GSW/GSV sweeper or a lift mast to a Unimog (the lift-out hydraulic cylinder or the lift mast for high emptying is also required)
  • Lifting hydraulic cylinder
  • In addition, the Unimog equipment plate is required for emptying the sweeper, emptying height approx. 50 cm.
  • Lift mast for high dumping for GSB/GSX/GSO-1200 or GSX/GSO 1500
    Front three-point linkage for small tractors, front/rear three-point linkage for tractors or mounting plate for Unimog is additionally required, emptying height 1.60 m, (A 2nd free control circuit is required on the carrier vehicle)
  • Lift mast for high dumping for GSX-1500/500 or GSB/GSX/GSO-2000
    Reinforced version, otherwise as for lift mast for GSX/GSO1200-1500
    Increased lifting height for lift mast, 2 m
    suitable for both versions of the lift mast
  • Forks for lift mast
    required for attaching a GSX/GSO-1500/500 litre or GSB/GSX/GSO-2000 to a lift mast (the sweeper must be equipped with fork lift attachment)
  • Chassis for lift mast
    to reduce the front axle load of the carrier vehicle, in conjunction with lift mast
  • Side brush right or left
    for all models of the GSB/GSX/GSO/GSV series, sweeping diameter 600 mm, can be switched on separately, adjustable speed, with own hydraulic drive
  • optional side brush Ø 750 mm incl. carrier plate available
  • Collision protection for side brushes
    Solid steel hoop around side brush
  • Water spray system 100 litres
    for all GSB/GSX/GSO/GSW/GSV models, operated with 12 V electric pump, spray bar with fine atomising nozzles, incl. water tank
  • Water spraying unit 200 litres
  • Optional 24 V water pump (instead of 12 V)
  • Heavy-duty battery (only available for GSE series)
    separate 12 V high-performance battery mounted on the sweeper for operation of the water spray device, with radio remote control and battery voltage maintenance device
  • Scraper bar for removing extremely crusted dirt
    for all GSX/GSO/GSW models, can be folded away, with strong spring steel segments, can be used on asphalt or concrete floors, e.g. for construction site exits
  • 100% steel bristle trim for main sweeper roller
    for all GSB/GSX/GSO/GSW models, instead of the standard 50/50% steel/polypropylene bristle set
  • Hydraulic unit with petrol engine
    as self-propelled unit for all models of the GSX series, robust 1-cylinder, Briggs & Stratton petrol engine, with E-starter, incl. remote control, cpl. with sound insulation bonnet, vibration damper and hydraulic pump
  • Hydraulic unit with diesel engine
    as self-propelled unit for all models of the GSX series, robust 1-cylinder, Kubota diesel engine, with E-starter, compl. with sound insulation bonnet and hydraulic pump
  • Remote control for diesel power unit
    complete with water- and impact-protected operating unit for actuation of diesel engine and water spraying unit
  • Hydraulic unit with electric motor
    as self-propelled unit for all models of the GSX series, equipped with powerful electric motor for continuous operation, optionally 24 to 80 volts, adaptation to other drive voltages possible, specially designed for use with electric forklifts, complete with remote control and hydraulic pump
  • hydraulic operation of the emptying mechanism
    Version for GSB/GSX/GSO models
  • Hydraulic tilting (GSO/GSW models)
  • Gear oil flow divider
    required for large oil flow rates, enables the oil flow to be divided with little heat loss. Excess oil flow passes through the gear set into the wheel loader return flow
  • Heavy-duty wheels
    for GSX/GSO/GSW/GSV-1200,1500,2000, and 2300 models instead of the standard superelastic wheels, sturdy welded steel construction, tread vulcanised onto wheel body made of full-elastic solid rubber, steel wire mesh in tyre base, double-welded tubular steel hub, recommended for uneven ground in outdoor use, surcharge per wheel
  • Special paint
    a variety of RAL colours can be chosen (series: red/RAL 3020)